-
excl. Shipping Rate
Delivery time: 1-2 days²
The IBP-6 battery is suitable for the Mate attachments, but be careful not all models are compatible. In order to check whether your thermal imaging attachment can use the battery, the device's battery socket must have 3 pins (see photo). If your device only has 2 pins, the battery is not compatible. Charging cradle including 2 batteries, suitable for InfiRay Mate MAH50, MAH50R and MAL38. -
excl. Shipping Rate
Delivery time: 1-2 days²
Removable battery with 6400 mAh and 8,5 hours runtime, suitable for Pulsar Telos thermal imaging cameras. -
excl. Shipping Rate
The battery is suitable for all thermal imaging attachments in the Hikmicro Thunder 2.0 product series. -
excl. Shipping Rate
Unusual modern cap with a wild boar motif, camouflage colors in pixel design. -
excl. Shipping Rate
Delivery time: 1-2 days²
The gift for special occasions, especially for hunters. The gift set is available in black and white or color for the nostalgic or more modern person, please select your favorite from the menu. -
excl. Shipping Rate
Delivery time: 1-2 days²
The vehicle hunting shield is attached to the vehicle's inner window using the suction cup. This means it can be removed at any time without leaving any residue. The material is heat-resistant and, thanks to its slight flexibility, is also unbreakable. With a wild motif in brown tones. -
excl. Shipping Rate
Delivery time: 1-2 days²
suitable for the Rusan Adapter Modular MARin order to be able to mount the Pard FT32 attachment on the ZF with repeatable accuracy. -
excl. Shipping Rate
Delivery time: 1-2 days²
Battery charging tray, suitable for the InfiRay IBP-2 battery. -
excl. Shipping Rate
Delivery time: 1-2 days²
The insert sleeve with a 52 thread is suitable for the InfiRay Viewfinder IOM-4X24-1 Booster. This sleeve can simply be pushed into the existing clamp adapter. Suitable for Rusan and Smartclip adapters. Please select the required size from the menu. -
excl. Shipping Rate
Delivery time: 1-2 days²
The car hunting shield is attached to the vehicle inner pane using the suction cup. It can therefore be removed at any time without leaving any residue. The material is heat-resistant and also unbreakable due to its slight flexibility. -
excl. Shipping Rate
Delivery time: 1-2 days²
Converter or insert ring suitable for Pulsar Forward, Krypton, Proton or Core attachments as well as Nitehog Viper, JSA nightlux TA or Guide Clip on devices. Compatible with Smartclip or Rusan adapter with 52 thread for mounting on an optic. Please select the desired model from the menu. -
excl. Shipping Rate
Delivery time: 1-2 days²
The capacity is 3500mAh. Suitable for the following devices:- Hikmicro: Cheetah C32F / Falcon FH25 / Falcon FH35 / Falcon FQ35 / Falcon FQ50
- Nitehog: Viper 35 / Viper 50
- Pard: NV007 BRD / NV007 BRD Set / NV007A BRD / NV007S BRD
-
excl. Shipping Rate
T-shirt with an elaborate wild motif and large "Dualoptik" lettering on the back, with a round neck Please select the desired size and color from the menu. -
excl. Shipping Rate
Delivery time: 1-2 days²
The insert ring is required to connect the Infiray 4x24 eyepiece in order to be able to use the Precise Jagen multi-adapter duo connector. -
excl. Shipping Rate
The magnification monocular converts an attachment to a 3x scope. It is suitable for the Rusan Adapter Modular MAR. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Nitecore battery bundle consists of a Nitecore NEW i4 charger + 4 x Nitecore Li-Ion battery type 16340 at a lower set price. -
excl. Shipping Rate
Delivery time: 1-2 days²
This assembly is used to attach the IR emitter to the Xeye ZF. The holder is not suitable for glasses with rail mounting. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Nitecore CRC123A battery replaces a CR123A battery. The capacity is 650 mAh. The battery is also protected against deep discharge, overcharging and short circuits. A PCB / IC protection is also one of the security features. -
excl. Shipping Rate
The battery magazine for the thermal imaging devices Xeye CH, CL and Saim series as well as Clip NV CD35 is suitable for 16650 batteries, it does not support CR123 batteries. -
excl. Shipping Rate
Replacement battery with a runtime of 3 hours, suitable for the InfiRay Cabin and InfiRay Finder thermal imaging devices. -
excl. Shipping Rate
Delivery time: 1-2 days²
The 5000 mAh battery is ideal for powerful flashlights as it can deliver up to 15 A of current. -
excl. Shipping Rate
Delivery time: 1-2 days²
The heat pads react independently with the air after opening. This allows thermal imaging target optics to be comfortably zeroed in. The scope of delivery includes 5 pieces. -
excl. Shipping Rate
The window sign can be attached to the vehicle interior using a suction cup and removed again at any time. The game motif with the inscription hunter is designed in traditional green. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Nitecore NEW i4 is a very versatile charger for almost all battery types. 4 batteries can be recharged at the same time. The maximum charging current is 1,5 A. The charging cradle also has protective functions such as overcharging and incorrectly inserted batteries. The charging of the batteries is indicated by LEDs. Operation on a 230 V socket or 12 V power supply. (also to the cigarette lighter socket of the car) -
excl. Shipping Rate
Delivery time: 1-2 days²
The 3500 mAh battery consists of Panasonic brand cells. It is short-circuit-proof and secured against overvoltage and deep discharge. -
excl. Shipping Rate
With this insert ring, the Smartclip no longer has to be dismantled if you want to use the Pulsar monocular. Please select the required size from the menu. -
excl. Shipping Rate
Delivery time: 1-2 days²
Matching lens hood for Precise Hunting Ferrules. Please select the desired version from the menu. -
excl. Shipping Rate
Delivery time: 1-2 days²
Weaver/Picatinny mount suitable for Pulsar Krypton or Proton. -
excl. Shipping Rate
Delivery time: 1-2 days²
Charging cable for battery chargers with 12 V connection, suitable for the cigarette lighter socket in cars. -
excl. Shipping Rate
Modern charger for almost all batteries, maximum 1000 mA charging current for 1 battery or 2 x 500 mA charging current for 2 batteries. Equipped with modern battery backup technology. Connection to 230 V socket or (car) power supply. -
excl. Shipping Rate
Delivery time: 1-2 days²
This cap also has a glass insert. The protective cap prevents the ingress of dust and moisture, which could penetrate through the mounted collet. Please select the desired version from the menu. -
excl. Shipping Rate
Delivery time: 1-2 days²
The color filter reduces the excessively bright reproduction and at the same time increases the contrast. He can just in the duo connector be plugged in. Please select the desired color from the menu. -
excl. Shipping Rate
Delivery time: 1-2 days²
The additional battery is suitable for the iRay Rico and Zoom series. -
excl. Shipping Rate
Practical battery magazine for thermal imaging attachments including batteries and charger -
excl. Shipping Rate
Delivery time: 1-2 days²
Lithium-ion battery with 5500 mAh capacity. The battery is suitable, for example, for the InfiRay Geni thermal imaging target devices. Suitable chargers can be found here. -
excl. Shipping Rate
Delivery time: 1-2 days²
The perfect solution for quickly deploying a thermal imaging camera and accessories. -
excl. Shipping Rate
Delivery time: 1-2 days²
High-quality front pocket, ideal for a handheld device and accessories, always ready to hand, compact, lightweight design. -
excl. Shipping Rate
Quick release screw for Pard accessory adapter NV007A & NV007V. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Rusan MAR adapter is a universal ZF adapter, it is particularly repeatable, slim and equipped with a quick release. Suitable for all common clip-on thermal imaging attachments and residual light intensifiers. You also need the right one Rusan Adapter Modular MAR Connector to connect your attachment to the MAR adapter. -
excl. Shipping Rate
Delivery time: 2-5 days²
The connector is also used for the Rusan MAR adapter required to mount the appropriate thermal imaging or night vision device. Important; Attachments without a lock nut require a corresponding lock nut with the appropriate thread size for the connector. Only the sizes M46 x 0,75 and M35 x 1,0 do not require an additional lock nut because this has already been integrated. Please select the appropriate connector from the menu. -
excl. Shipping Rate
Delivery time: 1-2 days²
Required to assemble a clamping sleeve; a 10 bit is included in delivery. -
excl. Shipping Rate
Delivery time: 2-5 days²
This duo connector is combined with the clamping sleeve to mount the Precise Jagen multi-adapter on a residual light intensifier or thermal imaging device. Please select the desired size of the duo connector from the menu. A clamping sleeve is also required for use, as well as an additional adapter for Hikmicro / Pulsar Forward, these are listed below. -
excl. Shipping Rate
230 V socket adapter with USB connection for USB chargers with fast charging function. -
excl. Shipping Rate
The quick charger can charge up to 4 batteries with a maximum charging current of 3 A at the same time. The connection is made with the USB-C cable. The following batteries can be charged with it: NiCD, NiMH, Lithium and IMR batteries. In addition, the device is protected against short circuits and reverse polarity protection, and defective or unsuitable batteries are also detected. -
excl. Shipping Rate
Delivery time: 1-2 days²
The universal quick charger can deliver a maximum charging current of 3 A, 2 or 1 battery can be charged at the same time, compatible with Li-Ion, IMR, NiCd and NiMH batteries. Power supply via USB-C connection. -
excl. Shipping Rate
Delivery time: 1-2 days²
This connector is required to combine a Hikmicro attachment with the multi-adapter. -
excl. Shipping Rate
Ideal addition to the multi-adapter, protects against the ingress of dust and moisture. -
excl. Shipping Rate
Delivery time: 2-5 days²
The protective cap is suitable for the Precise Jagen collet. It protects the daylight optics from dirt and moisture that could penetrate through the installed collet. Please select the desired version from the menu. -
excl. Shipping Rate
This optimized battery can deliver extremely high currents of up to 8 A and is therefore perfect for LED flashlights, headlamps and headlamps. -
excl. Shipping Rate
Delivery time: 2-5 days²
The perfect all-in-one solution, one adapter for all night vision and thermal imaging attachments. Extremely well thought-out and smart construction, which is characterized by the special repeatability. Please select the desired size of the collet from the menu. A duo connector is also required for use, as well as an additional adapter for Hikmicro, these are listed below. -
excl. Shipping Rate
Delivery time: 1-2 days²
Mono adapter made of one piece in a stable and slim design. With quick release. Can also be used for intermediate sizes with the help of the adhesive strips. Suitable for the following night vision devices: Pard NV007S BRD -
excl. Shipping Rate
Delivery time: 1-2 days²
Rifle scope universal adapter for mounting on a Pard night vision device, suitable for eyepieces with a diameter of 35 - 47 mm. With 3 intermediate rings for balancing. Fixation with a bayonet catch. Suitable for the following night vision device: Pard NV007S BRD -
excl. Shipping Rate
3 x magnifying eyepieces for Pulsar Krypton & Proton, InfiRay Clip & Mate, Hikmicro Thunder and for the JSA nightlux TA models. Our tip, that Smartclip Monocular Ring MRK allows the monocular to be used with a smart clip. It is therefore no longer necessary to disassemble the Smartclip. Available in sizes 56 & 62mm. -
excl. Shipping Rate
Practical transport box for 2 x 18650 batteries or 4 x 16340 or 4 x CR123 -
excl. Shipping Rate
Delivery time: 1-2 days²
Transport and storage box, suitable for 4 x 16340 or 4 x CR123 cells -
excl. Shipping Rate
Delivery time: 1-2 days²
This flat head battery 16650 battery is suitable for Xeye CH50, Xeye CL42, as well as for all JSA Power Plus thermal imaging devices. -
excl. Shipping Rate
Locking screw suitable for Rusan MAR adapter. -
excl. Shipping Rate
Magnetic holder for flashlights with a body diameter of 23-26 mm, can be attached to round or square magnetic objects. -
excl. Shipping Rate
Connection cable for a power bank to JSA nightlux TA attachments (The power bank cable is only suitable for devices with a rubber cover over the charging socket and 7-pin connection ). The cable is not suitable for charging the batteries. This cable does not fit older models that still have a plastic cover over the charging socket! -
excl. Shipping Rate
Delivery time: 1-2 days²
The insert plastic allows you to use the night vision or thermal imaging attachment as a handheld device without having to unscrew the adapter. Please choose the size you want from the menu. -
excl. Shipping Rate
Delivery time: 1-2 days²
This reducing ring and the Rusan adapter ARM35 are required to mount the Hikmicro Thunder TH19C or TE32C or Cheetah C52F on a daylight lens. -
excl. Shipping Rate
Delivery time: 1-2 days²
Universal tree mount for all devices with a ¼ inch tripod thread for trees, branches, pillars, etc. with a maximum diameter of 50 cm, alternatively can also be fixed with screws, with additional Weaver rail for additional accessories. -
excl. Shipping Rate
Protective cover suitable for all Rusan Adapter Modular MAR. -
excl. Shipping Rate
Universal clamp for night vision / thermal imaging devices with ¼ inch tripod thread, with tiltable ball head -
excl. Shipping Rate
Delivery time: 1-2 days²
The mobile phone holder is suitable for all Pulsar Helion thermal imaging devices. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Pulsar APS 3 battery is suitable for all Pulsar Axion and Thermion models and has a capacity of 3200 mAh. The running time is 4 hours. A separately available charger is required for recharging. -
excl. Shipping Rate
Delivery time: 1-2 days²
This replacement battery is compatible with all Pulsar Thermion, Digex and Digex-X devices. -
excl. Shipping Rate
Pulsar power bank with micro USB connection, 5000 mAh, suitable for Accolade, Accolade LRF, Accolade 2 LRF, Axion XM / Core FXQ, Digisight Ultra, Digisight Ultra LRF, Forward, Forward FN, Helion, Helion 2, Krypton FXG, Lexion, Trail, Trail LRF, Trail 2 LRF and many other devices with a micro USB connection. -
excl. Shipping Rate
Replacement battery, suitable for the night vision scope Pulsar Digisight Ultra N450 LRF and Digisight Ultra N455 LRF. -
excl. Shipping Rate
Basketball cap with wild boar emblem on the front and camouflage pattern in a bright orange. -
excl. Shipping Rate
Delivery time: 1-2 days²
The charger is suitable for the APS 5 battery, which is required for the Pulsar Axion XQ or Axion XQ LRF thermal imaging devices. -
excl. Shipping Rate
Delivery time: 1-2 days²
Suitable replacement battery for the Pulsar Axion XQ and Axion XQ LRF thermal imaging devices. -
excl. Shipping Rate
Delivery time: 2-5 days²
Naljepnica je pričvršćena s vanjske strane, tako da je pričvršćena na vanjski prozor vozila. -
excl. Shipping Rate
Delivery time: 2-5 days²
Naljepnica je pričvršćena s vanjske strane, tako da je pričvršćena na vanjski prozor vozila. -
excl. Shipping Rate
Delivery time: 1-2 days²
The chic basketball cap with wild boar motif and camouflage pattern is a real eye-catcher. The width can be adjusted on the back. -
excl. Shipping Rate
Rifle scope universal adapter for mounting on a Pard night vision device, suitable for eyepieces with a diameter of 35 - 47 mm. With 3 intermediate rings for balancing. Fixation with a bayonet catch. Suitable for the following night vision devices: Pard NV007 BRD, Pard NV007 BRD Set, Pard NV007A BRD, NV007V BRD -
excl. Shipping Rate
Delivery time: 1-2 days²
Mono adapter made of one piece in a stable and slim design. With quick release. Can also be used for intermediate sizes with the help of the adhesive strips. Suitable for the following night vision devices: Pard NV007 BRD, Pard NV007 BRD Set, Pard NV007A BRD, Pard NV007V BRD -
excl. Shipping Rate
Delivery time: 2-5 days²
Suitable for the following night vision devices: Pard NV007 BRD, Pard NV007 BRD Set, Pard NV007A BRD, Pard NV007V BRD How do I measure correctly?- Please include the brand of the lens and the magnification to be sure, so that you can be sure of receiving the correct adapter. In the checkout area of the shop you will find the "Order note" field.
-
excl. Shipping Rate
Delivery time: 3-4 days²
Pard mounting adapter suitable for the following scopes: Swarovski Z6i GEN.1 / Swarovski Z6i GEN.2 / Swarovski Z8i / Zeiss Conquest Suitable for the following night vision devices: Pard NV007 BRD, Pard NV007 BRD Set and Pard NV007A BRD, Pard NV007V BRD -
excl. Shipping Rate
Made of pleasantly soft fleece, it protects you from icy wind and freezing cold. In universal one size. -
excl. Shipping Rate
The universal quick charger can charge with a maximum of 6 A, it has an LCD display and is suitable for almost all Li-Ion batteries, it can also charge AA, AAA, AAAA, C, D batteries. -
excl. Shipping Rate
The Nitecore quick charger is suitable for almost all common lithium ion, IMR and LiFePO4 batteries as well as for Ni-MH and NiCd batteries of sizes AA, AA, AAAA, C and D. It has an LCD display, a USB port, a intelligent control, an adjustable charging current and 4 battery slots. -
excl. Shipping Rate
Delivery time: 1-2 days²
Matching adapter with cover for the Pulsar Forward FN attachment. The adapter is used to mount a 40 - 42 mm daylight lens. Various rings suitable for many daylight optics are supplied. -
excl. Shipping Rate
Delivery time: 1-2 days²
If your desired size is not included, you can alternatively use the Smart clip converter and Smart clip adapter AS order separately. The adapter is characterized by its extreme robustness. In addition, it fits perfectly and is extremely slim. It is locked in place with the quick-mounting clip. How do I measure correctly?- Please include the brand of the lens and the magnification to be sure, so that you can be sure of receiving the correct adapter. In the checkout area of the shop you will find the "Order note" field.
- To determine the correct size, the outer diameter of the optics is measured, the maximum tolerance is 0,5 mm.
-
excl. Shipping Rate
Delivery time: 1-2 days²
High-quality aluminum assembly for installing an optic. Please select your adapter diameter. How do I measure correctly?- Please include the brand of the lens and the magnification to be sure, so that you can be sure of receiving the correct adapter. In the checkout area of the shop you will find the "Order note" field.
- To determine the correct size, the outer diameter of the optics is measured, the maximum tolerance is 0,5 mm.
-
excl. Shipping Rate
Delivery time: 2-5 days²
A matrix ragasztó, így a jármű belső ablakaihoz rögzítve van. -
excl. Shipping Rate
Delivery time: 2-5 days²
A matrix ragasztó, így a jármű belső ablakaihoz rögzítve van. -
excl. Shipping Rate
Delivery time: 2-5 days²
A matrix ragasztó, így a jármű belső ablakaihoz rögzítve van. -
excl. Shipping Rate
Delivery time: 2-5 days²
Autocolantul este adeziv, deci este ataşat la geamul interior al vehiculului. -
excl. Shipping Rate
Delivery time: 2-5 days²
Autocolantul este adeziv, deci este ataşat la geamul interior al vehiculului. -
excl. Shipping Rate
Delivery time: 2-5 days²
Autocolantul este adeziv, deci este ataşat la geamul interior al vehiculului. -
excl. Shipping Rate
Delivery time: 2-5 days²
Autocolantul este adeziv, deci este ataşat la geamul interior al vehiculului. -
excl. Shipping Rate
Delivery time: 2-5 days²
Autocolantul este adeziv, deci este ataşat la geamul interior al vehiculului. -
excl. Shipping Rate
Delivery time: 2-5 days²
The sticker is adhesive on the inside, so it is attached to the inside of the vehicle window. -
excl. Shipping Rate
Delivery time: 2-5 days²
Autocolantul este adeziv, deci este ataşat la geamul interior al vehiculului. -
excl. Shipping Rate
Delivery time: 2-5 days²
The sticker is adhesive on the inside, so it is attached to the inside of the vehicle window.