-
excl. Shipping Rate
Delivery time: 1-2 days²
The IBP-6 battery is suitable for the Mate attachments, but be careful not all models are compatible. In order to check whether your thermal imaging attachment can use the battery, the device's battery socket must have 3 pins (see photo). If your device only has 2 pins, the battery is not compatible. Charging cradle including 2 batteries, suitable for InfiRay Mate MAH50, MAH50R and MAL38. -
excl. Shipping Rate
Delivery time: 1-2 days²
Removable battery with 6400 mAh and 8,5 hours runtime, suitable for Pulsar Telos thermal imaging cameras. -
excl. Shipping Rate
The battery is suitable for all thermal imaging attachments in the Hikmicro Thunder 2.0 product series. -
excl. Shipping Rate
Delivery time: 2-5 days²
Battery charging tray, suitable for the InfiRay IBP-2 battery. -
excl. Shipping Rate
Delivery time: 1-2 days²
The capacity is 3500mAh. Suitable for the following devices:- Hikmicro: Cheetah C32F / Falcon FH25 / Falcon FH35 / Falcon FQ35 / Falcon FQ50
- Nitehog: Viper 35 / Viper 50
- Pard: NV007 BRD / NV007 BRD Set / NV007A BRD / NV007S BRD
-
excl. Shipping Rate
Delivery time: 1-2 days²
The Nitecore battery bundle consists of a Nitecore NEW i4 charger + 4 x Nitecore Li-Ion battery type 16340 at a lower set price. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Nitecore CRC123A battery replaces a CR123A battery. The capacity is 650 mAh. The battery is also protected against deep discharge, overcharging and short circuits. A PCB / IC protection is also one of the security features. -
excl. Shipping Rate
The battery magazine for the thermal imaging devices Xeye CH, CL and Saim series as well as Clip NV CD35 is suitable for 16650 batteries, it does not support CR123 batteries. -
excl. Shipping Rate
Delivery time: 1-2 days²
Replacement battery with a runtime of 3 hours, suitable for the InfiRay Cabin and InfiRay Finder thermal imaging devices. -
excl. Shipping Rate
Delivery time: 1-2 days²
The 5000 mAh battery is ideal for powerful flashlights as it can deliver up to 15 A of current. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Nitecore NEW i4 is a very versatile charger for almost all battery types. 4 batteries can be recharged at the same time. The maximum charging current is 1,5 A. The charging cradle also has protective functions such as overcharging and incorrectly inserted batteries. The charging of the batteries is indicated by LEDs. Operation on a 230 V socket or 12 V power supply. (also to the cigarette lighter socket of the car) -
excl. Shipping Rate
Delivery time: 1-2 days²
The 3500 mAh battery consists of Panasonic brand cells. It is short-circuit-proof and secured against overvoltage and deep discharge. -
excl. Shipping Rate
Delivery time: 1-2 days²
Charging cable for battery chargers with 12 V connection, suitable for the cigarette lighter socket in cars. -
excl. Shipping Rate
Modern charger for almost all batteries, maximum 1000 mA charging current for 1 battery or 2 x 500 mA charging current for 2 batteries. Equipped with modern battery backup technology. Connection to 230 V socket or (car) power supply. -
excl. Shipping Rate
Delivery time: 1-2 days²
The additional battery is suitable for the iRay Rico and Zoom series. -
excl. Shipping Rate
Practical battery magazine for thermal imaging attachments including batteries and charger -
excl. Shipping Rate
Delivery time: 1-2 days²
Lithium-ion battery with 5500 mAh capacity. The battery is suitable, for example, for the InfiRay Geni thermal imaging target devices. Suitable chargers can be found here. -
excl. Shipping Rate
230 V socket adapter with USB connection for USB chargers with fast charging function. -
excl. Shipping Rate
The quick charger can charge up to 4 batteries with a maximum charging current of 3 A at the same time. The connection is made with the USB-C cable. The following batteries can be charged with it: NiCD, NiMH, Lithium and IMR batteries. In addition, the device is protected against short circuits and reverse polarity protection, and defective or unsuitable batteries are also detected. -
excl. Shipping Rate
Delivery time: 1-2 days²
The universal quick charger can deliver a maximum charging current of 3 A, 2 or 1 battery can be charged at the same time, compatible with Li-Ion, IMR, NiCd and NiMH batteries. Power supply via USB-C connection. -
excl. Shipping Rate
This optimized battery can deliver extremely high currents of up to 8 A and is therefore perfect for LED flashlights, headlamps and headlamps. -
excl. Shipping Rate
Practical transport box for 2 x 18650 batteries or 4 x 16340 or 4 x CR123 -
excl. Shipping Rate
Delivery time: 1-2 days²
Transport and storage box, suitable for 4 x 16340 or 4 x CR123 cells -
excl. Shipping Rate
Delivery time: 1-2 days²
This flat head battery 16650 battery is suitable for Xeye CH50, Xeye CL42, as well as for all JSA Power Plus thermal imaging devices. -
excl. Shipping Rate
Connection cable for a power bank to JSA nightlux TA attachments (The power bank cable is only suitable for devices with a rubber cover over the charging socket and 7-pin connection ). The cable is not suitable for charging the batteries. This cable does not fit older models that still have a plastic cover over the charging socket! -
excl. Shipping Rate
Delivery time: 1-2 days²
The Pulsar APS 3 battery is suitable for all Pulsar Axion and Thermion models and has a capacity of 3200 mAh. The running time is 4 hours. A separately available charger is required for recharging. -
excl. Shipping Rate
This replacement battery is compatible with all Pulsar Thermion, Digex and Digex-X devices. -
excl. Shipping Rate
Pulsar power bank with micro USB connection, 5000 mAh, suitable for Accolade, Accolade LRF, Accolade 2 LRF, Axion XM / Core FXQ, Digisight Ultra, Digisight Ultra LRF, Forward, Forward FN, Helion, Helion 2, Krypton FXG, Lexion, Trail, Trail LRF, Trail 2 LRF and many other devices with a micro USB connection. -
excl. Shipping Rate
Replacement battery, suitable for the night vision scope Pulsar Digisight Ultra N450 LRF and Digisight Ultra N455 LRF. -
excl. Shipping Rate
Delivery time: 1-2 days²
The charger is suitable for the APS 5 battery, which is required for the Pulsar Axion XQ or Axion XQ LRF thermal imaging devices. -
excl. Shipping Rate
Delivery time: 1-2 days²
Suitable replacement battery for the Pulsar Axion XQ and Axion XQ LRF thermal imaging devices. -
excl. Shipping Rate
The universal quick charger can charge with a maximum of 6 A, it has an LCD display and is suitable for almost all Li-Ion batteries, it can also charge AA, AAA, AAAA, C, D batteries. -
excl. Shipping Rate
The Nitecore quick charger is suitable for almost all common lithium ion, IMR and LiFePO4 batteries as well as for Ni-MH and NiCd batteries of sizes AA, AA, AAAA, C and D. It has an LCD display, a USB port, a intelligent control, an adjustable charging current and 4 battery slots. -
excl. Shipping Rate
Delivery time: 1-2 days²
Suitable for all Pulsar APS2 and APS3 batteries. The charging cradle has 2 slots in which 2 batteries can be charged at the same time. With micro-USB connection and 230 V mains plug. -
excl. Shipping Rate
The Panasonic Pro Power AAA batteries in a value pack with 48 pieces. Due to the high reliability and processing quality, these cells are particularly suitable for high-quality electronics. -
excl. Shipping Rate
The Panasonic Pro Power Mignon batteries have a leak protection that Anti Leak Protection. The batteries are suitable for use in electrical devices with a high power requirements. Special offer in a box of 48. -
excl. Shipping Rate
Micro / AAA / LR03 batteries, Anti-Leak Protection - Protection against leakage, ideal for electronic devices with high power consumption. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Panasonic photo battery makes the energy available quickly, which means that the consumer devices do not have any failures. In a cheap pack of 10 -
excl. Shipping Rate
Delivery time: 1-2 days²
230 V socket adapter for Laserluchs IR lasers, so that IR lasers can be operated permanently from the socket. This saves batteries. Compatible with the IR lasers LA 808-150 II, LA 850-50-PRO II, LA 905-50-PRO II, LA 980-50-PRO II and Laserluchs-5000 LED. -
excl. Shipping Rate
Mignon / AA / LR6 batteries, with Anti-Leak Protection (protection against leakage), especially for Suitable for devices with high current peaks. Powerful & reliable. -
excl. Shipping Rate
The charging cradle can be used for all Pular IPS batteries. Power is supplied via the micro-USB connection, either to a USB port on the PC or a power bank, or directly to a socket using the 230 V plug supplied. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Pulsar IPS14 battery can be used with all Pulsar thermal imaging devices. These include the Accolade, Helion, Trail, Forward F and Digisight Ultra model series. The capacity is 12,8 Ah, the running time is 21 - 26 hours. -
excl. Shipping Rate
Delivery time: 1-2 days²
The IPS7 battery pack is compatible with all Pulsar Helion, Krypton, Forward, Accolade, Trail and Digisight Ultra thermal imaging devices. The battery pack has a capacity of 6,4 Ah and a running time of 10 - 13 hours. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Panasonic CR2 battery is a special photocell that can provide energy quickly due to its design. Therefore, this lithium cell is mostly used for night vision devices, residual light intensifiers and for thermal imaging cameras. -
excl. Shipping Rate
The photo cell consists of lithium ion technology. The battery can be used from - 25 ° C to +65 ° C without the charge draining faster, and it is also particularly suitable for devices with high energy consumption. -
excl. Shipping Rate
10 pieces of lithium ion photocells, the batteries can be used from -25 ° C to +65 ° C without having to worry about a drop in performance. The cells are particularly suitable for devices with high energy consumption. -
excl. Shipping Rate
Replacement cap for Pulsar APS 5 batteries.