Pulsar Core FXQ35 BW

3.128,88  *Incl. VAT

Not available

!! Attention the article is no longer available !!

Monocular thermal imaging attachment with 5x magnification, AMOLED display in black and white, horizontal field of view at 100 m of 17,2 m, observation distance at 170 cm object size 1350 m, lens type F38/1,2

For mounting on an optic, the Smart clip adapter AS as the Smartclip Converter AS Pulsar thats it!

Not available

Description

Pulsar Core FXQ35 BW thermal imaging camera attachment

!! Attention the article is no longer available !!

Monocular version with display

The thermal imaging camera is implemented using an infrared microbolometer. The thermal imaging device can thus at night, but also during the day in poor visibility such as fog, snow and rain. It unmasks living beings even if they are partially covered by branches, grass or ears of grain.

Through the monocular things of more than one kilometer distance can be observed. The advantage over residual light intensifiers is the independence of a light source, and there can also be no disruptive reflections.

The field of application of the FXQ35 BW is very versatile. These thermal devices are used for wildlife observation, area reconnaissance in poor visibility, official surveillance, for hunting and even in the rescue service.

The Pulsar Core FXQ35 BW was designed for the Continuous use designed. The device should always be kept in the bag provided with the light protection cover on. After use, it is never left on. If the device is taken from the cold to the warm room, it is advisable not to switch on the device for the next two to three hours in order to avoid condensation. Very important, never hold the device in direct sunlight or other very bright light sources, this could damage the electronics.

The thermal imaging device can Enlarge 5x. The sensor has a resolution of 384 x 288 pixels. Mounting on an optical device is quick and easy. Observations are possible up to a distance of 1800 meters. The display consists of high-contrast  AMOLEDs (black and white). Objects can be better recognized by the Iris software technology used. Calibration is manual, automatic, or semi-automatic. Thanks to the remote control, the application has many more options.

For mounting on an optic, the Smart clip adapter AS as the Smartclip Converter AS Pulsar thats it!

Technical data:

  • warranty
  • Protection class (according to IEC 60529 standard): IPX5 / IPX7
  • Waterproof
  • Operating Temperature: -25°C – +50°C
  • Dimensions: 300 mm x 71 mm x 67 mm
  • Weight (without batteries): 650 g
  • Power supply: 2 x CR123A 3V lithium ion battery
  • Power supply: 5V USB / 12V EPS
  • Operating time: 4 hours
  • Observation distance: (with an object size of 170 cm: 1350 m
  • Magnification: 5X
  • Lens: F38/1,2
  • Horizontal field of view at 100 m: 17,2 m
  • Eye relief: 16mm
  • Diopter compensation: ± 5
  • Close focus: 5 m
  • Microbolometer type: uncooled
  • Microbolometer resolution: 384 x 288 px
  • Refresh rate: 50 Hz
  • Pixel size: 17 µm
  • Display type: AMOLED (b/w)
  • Display resolution: 640 x 480px

Delivery:

  • Pulsar Core FXQ35
  • Carrying case
  • strap
  • External power adapter
  • USB cable
  • Remote Control
  • Operating Instructions
  • cleaning cloth

Important note:

  • Please note the legal regulations in your respective federal state or country.
  • Matching Pulsar accessories can be found here here.

Suitable accessories

Up