-
excl. Shipping Rate
Delivery time: 1-2 days²
The heat pads react independently with the air after opening. This allows thermal imaging target optics to be comfortably zeroed in. The scope of delivery includes 5 pieces. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Nitecore CRC123A battery replaces a CR123A battery. The capacity is 650 mAh. The battery is also protected against deep discharge, overcharging and short circuits. A PCB / IC protection is also one of the security features. -
excl. Shipping Rate
Delivery time: 1-2 days²
The capacity is 3500mAh. Suitable for the following devices:- Hikmicro: Cheetah C32F / Falcon FH25 / Falcon FH35 / Falcon FQ35 / Falcon FQ50
- Nitehog: Viper 35 / Viper 50
- Pard: NV007 BRD / NV007 BRD Set / NV007A BRD / NV007S BRD
-
excl. Shipping Rate
Delivery time: 2-5 days²
The perfect all-in-one solution, one adapter for all night vision and thermal imaging attachments. Extremely well thought-out and smart construction, which is characterized by the special repeatability. Please select the desired size of the collet from the menu. A duo connector is also required for use, as well as an additional adapter for Hikmicro, these are listed below. -
excl. Shipping Rate
Delivery time: 1-2 days²
Mono adapter made of one piece in a stable and slim design. With quick release. Can also be used for intermediate sizes with the help of the adhesive strips. Suitable for the following night vision devices: Pard NV007S BRD -
excl. Shipping Rate
Delivery time: 1-2 days²
The Pulsar APS 3 battery is suitable for all Pulsar Axion and Thermion models and has a capacity of 3200 mAh. The running time is 4 hours. A separately available charger is required for recharging. -
excl. Shipping Rate
Delivery time: 1-2 days²
Replacement battery with a runtime of 3 hours, suitable for the InfiRay Cabin and InfiRay Finder thermal imaging devices. -
excl. Shipping Rate
The battery magazine for the thermal imaging devices Xeye CH, CL and Saim series as well as Clip NV CD35 is suitable for 16650 batteries, it does not support CR123 batteries. -
excl. Shipping Rate
Delivery time: 1-2 days²
Suitable replacement battery for the Pulsar Axion XQ and Axion XQ LRF thermal imaging devices. -
excl. Shipping Rate
Delivery time: 1-2 days²
The charging cradle can be used for all Pular IPS batteries. Power is supplied via the micro-USB connection, either to a USB port on the PC or a power bank, or directly to a socket using the 230 V plug supplied. -
excl. Shipping Rate
Delivery time: 2-5 days²
This duo connector is combined with the clamping sleeve to mount the Precise Jagen multi-adapter on a residual light intensifier or thermal imaging device. Please select the desired size of the duo connector from the menu. A clamping sleeve is also required for use, as well as an additional adapter for Hikmicro / Pulsar Forward, these are listed below. -
excl. Shipping Rate
Delivery time: 1-2 days²
The modular device not only expands the iRay Mate attachments with an LRF, the battery can also act as an expanded power supply to increase the running time by 5 hours. You can find a suitable replacement battery here. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Nitecore battery bundle consists of a Nitecore NEW i4 charger + 4 x Nitecore Li-Ion battery type 16340 at a lower set price. -
excl. Shipping Rate
Delivery time: 1-2 days²
High-quality aluminum assembly for installing an optic. Please select your adapter diameter. How do I measure correctly?- Please include the brand of the lens and the magnification to be sure, so that you can be sure of receiving the correct adapter. In the checkout area of the shop you will find the "Order note" field.
- To determine the correct size, the outer diameter of the optics is measured, the maximum tolerance is 0,5 mm.
-
excl. Shipping Rate
Delivery time: 1-2 days²
The monocular is screwed directly onto a clip or Mate thermal imaging attachment. This allows it to be converted into a handheld observation device. Danger! An existing adapter from Rusan or Smartclip can be used with this insert sleeve or for the precise hunting system with this adapter ring to use. This means you don't have to re-shot every time. -
excl. Shipping Rate
Delivery time: 1-2 days²
The eyepiece rubber is suitable for Pulsar Digex and Thermion models. -
excl. Shipping Rate
Delivery time: 1-2 days²
This adapter is required to be able to mount a daylight lens. The adapter is available in sizes 30 mm - 68 mm. Please select your adapter diameter. For mounting on a Pulsar Core, Forward, Krypton or Proton an additional this converter thats it! How do I measure correctly?- Please include the brand of the lens and the magnification to be sure, so that you can be sure of receiving the correct adapter. In the checkout area of the shop you will find the "Order note" field.
- To determine the correct size, the outer diameter of the optics is measured, the maximum tolerance is 0,5 mm.
-
excl. Shipping Rate
Delivery time: 1-2 days²
Lens hood, suitable for all InfiRay Tube thermal imaging scopes. -
excl. Shipping Rate
Delivery time: 1-2 days²
Bluetooth remote control, suitable for Forward F455, Forward F455S, Forward FN455, Forward FN455S, Krypton XG50, Krypton FXG50, Proton XQ30 -
excl. Shipping Rate
Delivery time: 1-2 days²
Recoil absorbers made of durable rubber in a universal one-size-fits-all. Suitable for the following night vision devices: Pard NV007 BRD, Pard NV007 BRD Set, Pard NV007A BRD and Pard NV007S BRD. -
excl. Shipping Rate
Replacement cap for Pulsar APS 5 batteries. -
excl. Shipping Rate
Delivery time: 1-2 days²
Suitable for all Pulsar APS2 and APS3 batteries. The charging cradle has 2 slots in which 2 batteries can be charged at the same time. With micro-USB connection and 230 V mains plug. -
excl. Shipping Rate
Delivery time: 1-2 days²
The IPS7 battery pack is compatible with all Pulsar Helion, Krypton, Forward, Accolade, Trail and Digisight Ultra thermal imaging devices. The battery pack has a capacity of 6,4 Ah and a running time of 10 - 13 hours. -
excl. Shipping Rate
Delivery time: 1-2 days²
This assembly is used to attach the IR emitter to the Xeye ZF. The holder is not suitable for glasses with rail mounting. -
excl. Shipping Rate
Delivery time: 1-2 days²
If your desired size is not included, you can alternatively use the Smart clip converter and Smart clip adapter AS order separately. The adapter is characterized by its extreme robustness. In addition, it fits perfectly and is extremely slim. It is locked in place with the quick-mounting clip. How do I measure correctly?- Please include the brand of the lens and the magnification to be sure, so that you can be sure of receiving the correct adapter. In the checkout area of the shop you will find the "Order note" field.
- To determine the correct size, the outer diameter of the optics is measured, the maximum tolerance is 0,5 mm.
-
excl. Shipping Rate
Delivery time: 1-2 days²
The charger is suitable for the APS 5 battery, which is required for the Pulsar Axion XQ or Axion XQ LRF thermal imaging devices. -
excl. Shipping Rate
Connection cable for a power bank to JSA nightlux TA attachments (The power bank cable is only suitable for devices with a rubber cover over the charging socket and 7-pin connection ). The cable is not suitable for charging the batteries. This cable does not fit older models that still have a plastic cover over the charging socket! -
excl. Shipping Rate
Delivery time: 2-3 days²
The new night vision add-on device with permanently installed IR illuminator assembly, optional LRF, 2k capable night vision sensor, 38 m field of view width, 22,5 mm lens, video recorder for image, video and sound, as well as WiFi. Bulletproof up to 6000 joules. You can select the desired IR emitter in the menu, as well as the optional laser range finder. -
excl. Shipping Rate
The new Iray high-end model series with dual system with 1,6x and 12,8x optical magnification, battery changing system, new housing design, range of up to 1974 meters, modern VOx sensor with 640x512 pixel resolution at 12µm pitch, 32 GB video recorder, WiFi, approx. 2 x 10 hours of operating time. -
This eyepiece supplements the NV Mau residual light amplifier, thanks to the high-quality HD technology with 3 x zoom, an extra pair of binoculars can be saved. The delivery includes an adaptation bracket and an eyepiece diaphragm. Please select the required size from the menu.
-
excl. Shipping Rate
Delivery time: 1-2 days²
The Rusan MAR adapter is a universal ZF adapter, it is particularly repeatable, slim and equipped with a quick release. Suitable for all common clip-on thermal imaging attachments and residual light intensifiers. You also need the right one Rusan Adapter Modular MAR Connector to connect your attachment to the MAR adapter. -
excl. Shipping Rate
Delivery time: 2-5 days²
The protective cap is suitable for the Precise Jagen collet. It protects the daylight optics from dirt and moisture that could penetrate through the installed collet. Please select the desired version from the menu. -
Delivery time: 1-2 days²
The XM30F thermal imaging camera is handheld. Innovations compared to the predecessor are the Stream Vision 2 app and a higher quality housing. The thermal device offers a resolution of 320 x 240 pixels, a large F30 lens, 1,3 km range, 16 GB video recorder, WiFi, 8 different color palettes, IPX7 protection and APS3 battery with 7 hours of operating time. -
excl. Shipping Rate
Delivery time: 1-2 days²
The Rusan adapter is used to connect an optic to the TA425, TA435, TA450, Nitehog Viper or Nitehog Viper 50 Next thermal imaging camera attachment. Please select the desired adapter size. How do I measure correctly?- Please include the brand of the lens and the magnification to be sure, so that you can be sure of receiving the correct adapter. In the checkout area of the shop you will find the "Order note" field.
- To determine the correct size, the outer diameter of the optics is measured, the maximum tolerance is 0,5 mm.
-
excl. Shipping Rate
Delivery time: 1-2 days²
Rifle scope universal adapter for mounting on a Pard night vision device, suitable for eyepieces with a diameter of 35 - 47 mm. With 3 intermediate rings for balancing. Fixation with a bayonet catch. Suitable for the following night vision device: Pard NV007S BRD -
excl. Shipping Rate
Rifle scope universal adapter for mounting on a Pard night vision device, suitable for eyepieces with a diameter of 35 - 47 mm. With 3 intermediate rings for balancing. Fixation with a bayonet catch. Suitable for the following night vision devices: Pard NV007 BRD, Pard NV007 BRD Set, Pard NV007A BRD, NV007V BRD -
excl. Shipping Rate
Delivery time: 1-2 days²
Mono adapter made of one piece in a stable and slim design. With quick release. Can also be used for intermediate sizes with the help of the adhesive strips. Suitable for the following night vision devices: Pard NV007 BRD, Pard NV007 BRD Set, Pard NV007A BRD, Pard NV007V BRD -
excl. Shipping Rate
Delivery time: 1-2 days²
The Pulsar IPS14 battery can be used with all Pulsar thermal imaging devices. These include the Accolade, Helion, Trail, Forward F and Digisight Ultra model series. The capacity is 12,8 Ah, the running time is 21 - 26 hours. -
excl. Shipping Rate
Delivery time: 1-2 days²
Most powerful thermal imaging handheld device of the iRay Finder series with 640 x 480 pixel detector, OLED monitor, 35 mm objective lens, laser range finder, quick-change battery, 32 GB video memory and WiFi. -
excl. Shipping Rate
Delivery time: 1-2 days²
The insert ring is required to connect the Infiray 4x24 eyepiece in order to be able to use the Precise Jagen multi-adapter duo connector. -
excl. Shipping Rate
Delivery time: 2-5 days²
The connector is also used for the Rusan MAR adapter required to mount the appropriate thermal imaging or night vision device. Important; Attachments without a lock nut require a corresponding lock nut with the appropriate thread size for the connector. Only the sizes M46 x 0,75 and M35 x 1,0 do not require an additional lock nut because this has already been integrated. Please select the appropriate connector from the menu. -
excl. Shipping Rate
This replacement battery is compatible with all Pulsar Thermion, Digex and Digex-X devices. -
excl. Shipping Rate
Delivery time: 1-2 days²
Matching quick-change adapter for connecting the Pulsar Krypton attachments or Proton with an optic. -
excl. Shipping Rate
Delivery time: 1-2 days²
Highly reliable pocket-sized thermal imaging scope with brand new European made sensor with 640 x 480 pixel resolution, 35 mm objective lens, AMOLED screen, WiFi, 16 GB recorder, 8 color palettes, APS5 battery with 11 hours operating time and real laser range finder. -
excl. Shipping Rate
Delivery time: 1-2 days²
This reducing ring and the Rusan adapter ARM35 are required to mount the Hikmicro Thunder TH19C or TE32C or Cheetah C52F on a daylight lens. -
excl. Shipping Rate
Delivery time: 1-2 days²
Converter or insert ring suitable for Pulsar Forward, Krypton, Proton or Core attachments as well as Nitehog Viper, JSA nightlux TA or Guide Clip on devices. Compatible with Smartclip or Rusan adapter with 52 thread for mounting on an optic. Please select the desired model from the menu. -
excl. Shipping Rate
Ideal addition to the multi-adapter, protects against the ingress of dust and moisture. -
excl. Shipping Rate
Delivery time: 1-2 days²
The 3500 mAh battery consists of Panasonic brand cells. It is short-circuit-proof and secured against overvoltage and deep discharge. -
excl. Shipping Rate
Delivery time: 2-3 days²
The binocular observation device is the perfect solution for long sessions. Equipped with laser rangefinder, WiFi and 16GB video recorder. The detector has a resolution of 640 x 480 pixels, the lens is 50 mm in size, and a person can be observed up to 1,8 km. -
excl. Shipping Rate
Powerful thermal imaging monocular with a range of 1,8 km, 384 x 288 pixel sensor, OLED screen, 3,5 x magnification, 16 GB video recorder, 13 m field of view, WiFi, 7 hours of battery life and weatherproof housing.
