Laser lynx LA 905-50-PRO II

Description

Laser lynx LA 905-50-PRO II

Laser IR brightener

!! Attention the article is no longer available !!

The solution for deer

The infrared laser LA 905-50-PRO-II was specially developed for optic tubes of residual light amplifiers, whose performance at exactly this wavelength of 905 nm can show their full potential. The manufacturer Photonis offers suitable night vision devices with the devices of the second generation and the third generation with GaAs photo cathode.

The wavelength of 905 nm produces a laser beam that is even known to be sensitive red deer cannot be recognized. The range of the laser beam is also related to the wavelength. Of the laser lynx The 905-50-PRO II is around 70% of generation three GaAs, as well as 80% of Photonis devices of the second generation, which is a very good value. Generation 2 night vision devices made in Russia achieve 40 – 50% of this distance.

This IR laser illuminator is suitable for Generation 2 and Generation 3 Photonis tubes. The aluminum housing is waterproof, and the laser device has also been optimized to withstand shocks in order to avoid damage to the electronics. The 905 50 Pro 2 has a toggle switch, which is also protected against accidental activation. Focusing, in order to be able to reduce or enlarge the light cone, is carried out using a rotary thread at the head of the laser. That is why this mechanical part has been additionally reinforced. The manufacturer Laserluchs uses a patented collimator system for the built-in optics.

It would be important to mention that eye safety. Because the device is 100% safe, even if you look directly into the laser beam, you don't have to worry about eye damage. The infrared brightener corresponds to laser class 1.

Our advice:
To avoid damage to a night vision device, switch on the IR illuminator first off and only then the night vision optics. In addition, you should never put the IR laser and the night vision device aside when they are switched on, as the tube of the night vision device could be damaged due to cross-fading.

Technical data:

• warranty
• Laser diode power: 50 mW, CW
• Wavelength: 905nm
• Laser class: 1
• Beam Angle: 1,5°-15°
• Lifetime: 10.000 hours
• Operating temperature: -20°C - +50°C
• Storage temperature: -40°C – +80°C
• Power supply: CR123A 3 volt lithium ion battery
• Operating Current: 100mA
• Operating Voltage: 3,0-3,6VDC
• Dimensions: 30 x 143 mm

Delivery:

• Laser lynx LA 905-50-PRO II
• Carrying case
• 2 x CR123A 3 volt lithium ion battery
• Operating Instructions

Important note:

• A mount is required for mounting on an optic, you can find it here here.
• Comparison table of infrared lasers from Laserluchs