Pulsar Proton XQ30

2.190,00  *Incl. VAT

Not available

!! Attention the article is no longer available !!

The Proton XQ30 thermal imaging module can be used handheld or with the included 5x eyepiece. With the separately available PSP adapter, it can also be used as an attachment. The video recorder is 16 GB, equipped with WiFi, 6 hours battery, image boost and a thermal imaging sensor with a resolution of 384 x 288 pixels.

For mounting on an optic, the Smart clip adapter AS as the Smartclip Converter AS Pulsar thats it!

Not available

Item number: 2080 Category: Schlagwörter: ,

Description

Pulsar Proton XQ30

Thermal Imaging Camera Hand & Attachment

!! Attention the article is no longer available !!

with mountable monocular

The Proton XQ30 consists of a thermal imaging device and a 5x magnifying telescope.

The special is the Flexibility, because it can be used as a handheld thermal imaging device, and the eyepiece also offers a Handheld device with 5x magnification. And as a third variant, with the separately available PSP adapter, it can also be used as a intent mount on a daylight lens.

owner of Pulsar Krypton can also use its eyepiece for this, the recordings are identical.

an existing one PSP adapter can remain attached to switch between using a daylight optic or the Pulsar 5×30 B monocular in a matter of seconds to switch. Pulsar also uses the well-known mechanism for this, which exact centering of the thermal image view in the field of view of the daylight optics.

The built-in thermal sensor is extremely sensitive and can even handle minimal Temperature differences show clearly. Even in adverse conditions such as a thick wall of fog or sleet, it skilfully shows its strengths in terms of playback quality.

The hunting use imposes enormous conditions, among other things weight, size and robustness of the equipment play an important role. The Proton XQ-30 just weighs 370 g, what by the extremely resistant Magnesium housing is made possible. In addition, the housing offers the best conditions for cold or hot climates. through the IPX7 standard snow, rain and moisture cannot penetrate the device.

The use as a target acquisition is through the Image Boost Technology supported, which can display objects particularly sharply. Thus, the detection of a living being or any other heat source can be distinguished even better from the environment.

The Gigabyte 16 Large memory allows you to record thousands of images or hours of video. The video recorder recordings can also be sent to a smartphone or computer afterwards transfer .

Through WiFi up to 4 other people can live the via the Smart Vision app track view. App is available free of charge for both iOS and Android devices (see below).

The power supply is through the APS5 battery implemented, depending on the operating mode, this lasts for 6 hours, thanks to the quick-change mechanism this can be exchanged for a full APS5 battery in no time at all. For the recharge A suitable device for the 2 batteries is included in the scope of delivery.

For mounting on an optic, the Smart clip adapter AS as the Smartclip Converter AS Pulsar thats it!

Technical data:

  • warranty
  • Sensor type: VOx
  • Sensor resolution: 384 x 288 pixels
  • Pixel pitch: 17µm
  • Objective lens: F30 / 1.2
  • Range: 900 m
  • Field of view: 12,4 x 9,3 °
  • Field of view at 100m: 21,8 x 16,3 m
  • Monitor type: AMOLED
  • Monitor resolution: 1024 x 768 pixels
  • Magnification: 5X
  • VCR: photo / video
  • VCR memory: 16 GB
  • Battery: Battery Pack APS 5
  • Battery capacity: 4900 mAh
  • Wi-Fi: Yes
  • Dimensions: 248 x 59 x 75 mm
  • Weight (without battery / eyepiece) : 300 g
  • Pulsar model number: 77378

Delivery:

  • Pulsar Proton XQ30
  • Pulsar Monocular 5×30B
  • 2 x battery pack APS 5
  • Battery charger
  • USB cable
  • Operating Instructions
  • cleaning cloth
  • Carrying case

Important note:

Suitable accessories

Up